Robot Coupe MP 350 Combi Ultra, Manual

Page: 16 / 21

15
27/11/2020
ROBOT-COUPE power mixers are equipped with a
safety system comprising of a:
- Safety control button
- Thermal protection system
- Overload protection system
- No volt release a supply failure.
- Intensity Warning Light
- Power cord safety
• Safety control button
This safety mechanism prevents any unintentional
starting of the power mixer. In fact, it is necessary
to press down two buttons to start the power
mixer. In order to start the machine, read the
paragraph entitled OPERATING THE APPLIANCE
(page 6).
• Thermal protection system
If the appliance is left running for too long, the
thermal protection system will automatically shut
it down. If this happens, wait for the appliance to
cool down completely (approx. 30 min.) before
following the procedure for OPERATING THE
APPLIANCE (page 6).
• Overload protection system
If the motor becomes overloaded due to the
presence of a spoon or other utensil in the pan or
the thickness of the mixture, it will shut down. This
shutdown signals that the preparation is either
SAFETY
W A R N I N G
The blades are extremely sharp. Handle
with care.
too thick or not suitable for processing with a stick
blender. To switch your appliance back on, follow
the procedure for OPERATING THE APPLIANCE
(page 6).
• No volt release a supply failure
In the event of a power cut or after the machine has
been unplugged, the power mixer will not restart
by itself. It is necessary to follow the steps in the
paragraph entitled OPERATING THE APPLIANCE
(page 6).
• Intensity Warning Light
(MP 600 Ultra and MP 800 Turbo)
In case of overload or use
of the mixer in a too sticky
preparation, the intensity
warning flashes for 5
seconds to inform you that
the motor will stop shortly.
This stop indicates that the
preparation in process is too
thick or can not be made
with a stick blender.
In this case, you can still restart your mixer.
However, your machine will stop again if the
consistency of the preparation is not modified.
• Power cord safety
Before you connect the power cord to the mains
supply, always check that this cord:
1°) is not damaged in any way;
2°) has been properly connected to the machine
handle. If this is not the case, follow the procedure
for SWITCHING ON THE APPLIANCE (page 6).
L
ight
Single-phase machine MP 350 Combi Ultra
Single-phase machine MP 450 Combi Ultra
Motor
Mixer Speed
(rpm)
Whisk Speed
(rpm)
Intensity
(Amp.)
230 V / 50 Hz 1,500 to 9,000 250 to 1,500 2.1
120 V / 60 Hz 1,500 to 9,000 250 to 1,500 3.7
220 V / 60 Hz 1,500 to 9,000 250 to 1,500 2.0
Motor
Mixer Speed
(rpm)
Whisk Speed
(rpm)
Intensity
(Amp.)
230 V / 50 Hz 1,500 to 9,000 250 to 1,500 2.3
120 V / 60 Hz 1,500 to 9,000 250 to 1,500 4.5
220 V / 60 Hz 1,500 to 9,000 250 to 1,500 2.2
Single-phase machine
MP 450 FW Ultra / MP 450 XL FW Ultra
- Power shown on data plate.
Motor
Mixer Speed
(rpm)
Intensity
(Amp.)
230 V / 50 Hz 250 to 1500 2.3
120 V / 60 Hz 250 to 1500 4.5
220 V / 60 Hz 250 to 1500 2.2