7
ENGLISH
Removing the bell from the tube
- Unplug the power mixer.
- Turn the bell in the direction of the arrow (see
drawing below) to detach it from the tube.
order to ensure that the mixture is completely homo-
geneous. We strongly advise you to keep the whisk
from touching the sides of the bowl. For maximum
efficiency, at least one-fifth of the whisk length should
be immersed. We also strongly advise you to start
the processing at a low speed.
ASSEMBLY /
DISASSEMBLY
• MIXER ASSEMBLY
Attaching the shaft to the motor unit.
- Unplug the power mixer.
- Note that each end of the shaft has a threaded
plastic piece. One is longer than the other and
doesn’t have a rubber “O” ring. Insert this longer
plastic end
into the motor housing
, and
turn the shaft in the direction of the arrow until it is
tight.
B
A
A
B
TURN TO REMOVE BELL
TURN TO ATTACH BELL
Removing the shaft from the motor unit
- Unplug the power mixer.
- Turn the shaft counterclockwise until it is removed.
Attaching the bell to the tube
- Unplug the power mixer.
- Insert the threaded shaft
into the housing
of
the bell. Turn the bell in the direction of the arrow
(see drawing) until it is tight.
A
B
WORKING POSITION
For a more ergonomic
approach, we recommend
that you hold the handle of
the appliance in one hand
and the container with the
other. It is a good idea to tilt
the power mixer slightly,
making sure that the bell
does not touch the bottom
of the container.
Always make sure that the bell is sufficiently immersed
to avoid splashing and that the air vents of the motor
unit do not come into contact with any liquid.
For optimum efficiency, two thirds of the shaft should
be immersed in the preparation.
Do not rest the bell against the bowl.
The splashguard should always be in place.
• WHISK FUNCTION
We recommend that you
hold the power mixer by the
handle and the bottom of
the motor unit.
You can also hold the
appliance by the handle
with one hand, leaving the
other hand free to hold the
bowl, if necessary.
While processing we recom-
mend that you move the
whisk around in the bowl, in
Mini MP USA 18/12/06 12:56 Page 7
Summary of Contents for Mini MP 170 V.V.
