Robot Coupe Blixer 4 V.V., User Manual

Page: 7 / 26

7
INTRODUCTION TO YOUR
NEW EMULSIFIER-MIXER
BLIXER
®
2 • BLIXER
®
3 •
BLIXER
®
4 • BLIXER
®
4 V.V.
ROBOT-COUPE has developed a new concept in
appliances: the
BLIXER
®
.
The BLIXER
®
combines the features of two well-known
appliances: the cutter and the blender-mixer.
The BLIXER
®
is perfectly geared to professional
needs. It can perform any number of tasks which
you will soon discover as you use it.
The BLIXER
®
will make it easy to prepare mixed
liquid or semi-liquid, raw or cooked meals.
The BLIXER
®
replaces the blender which has never
been entirely satisfactory because it cannot process
solid foods.
Thanks to its simple design, all components requiring
frequent handling for maintenance or cleaning can
be fitted and removed quickly.
To make things easier for you, this manual gives a
breakdown of all the various fitting operations.
This manual contains important information
designed to help the user get the most out of the
emulsifier-mixer BLIXER
®
.
We therefore recommend that you read it carefully
before using your machine.
SWITCHING ON
THE MACHINE
• ADVICE ON ELECTRICAL CONNECTION
Before plugging in, check that your power supply
corresponds to that indicated on the machine’s
identification plate.
• Single phase Blixer
®
2 - Blixer
®
3 - Blixer
®
4
The Blixer
®
2 / Blixer
®
3 / Blixer
®
4 comes with different
types of motors: 230 V / 50 Hz
120 V / 60 Hz
220 V / 60 Hz
The machine comes with a single phase plug
connected to a power cord.
• Three phase
Blixer
®
4
The Blixer
®
4 comes with different types
of motors: 400 V / 50Hz
220 V / 60Hz
380 V / 60Hz
This machine is supplied with a cable to which you
simply attach the appropriate electrical plug or
isolator for you system. The cable has four wires,
one earth wire, plus three phase wires.
If you have a 4-pin plug:
1) Connect the green and yellow earth wire to the
earth pin.
2) Connect the three other wires to the remaining
pins.
If you have more than 4 pins in the plug, please
note the robot-coupe does not require a neutral
wire.
Switch on the empty machine, making sure that
the blade is rotating properly in an anti-clockwise
direction.
If the blade turns in a clokwise direction, swap over
two wires.
GREEN YELLOW is the earth
DO NOT DISCONNECT
• Single phase Blixer
®
4 V.V.
(Variable speed):
Blixer
®
4 V.V. is available with a single phase motor
+ variable speed: 230 V / 50 - 60 Hz /1
The standardized plug must be calibrated to a
minimum of 10 amps and preferably 16 amps, if
the appliance is used intensively.
• CONTROL PANEL
Red switch = “Stop” switch.
Green switch = “On” switch.
Black switch = Pulse control.
Single phase Blixer ® 2/ Blixer ® 3/ Blixer ® 4: 1 speed
3000 rpm using 50 Hz and 3600 rpm using 60 Hz.
Three phase Blixer
®
4:
Speed selector 1500 or 3 000 rpm.
Single phase
Blixer
®
4 V.V.:
Speed variation from 300 to 3.000 rpm.
ASSEMBLY
1) With the motor unit -
facing you, make sure that
the bowl is straight in rela-
tion to the motorshaft, with
the bowl handle moved
slightly to the left.
2) Turn the bowl handle to
the right until the bowl
locating plates are securely
positioned in their sockets.
The handle should now be
straight in front of you.
W A R N I N G
This appliance must be plugged into an
earthed socket (risk of electrocution).