RoboSense RS-Ruby Lite, User Manual, Page: 31 / 104

RS-Ruby Lite Users’ Manual
26
Appendix A Websever
RS-Ruby Lite supports websever. In the webpage, we can execute the parameters, device
information or status monitoring and firmware update for RS-Ruby Lite.
The IP of websever is always same as the device IP, default IP is 192.168.1.200. If the default
IP is changed, the websever IP will also turn into the new IP of device.
A.1 Visiting Websever
After correctly connecting the RS-Ruby Lite with PC and configuring them, use a web browser
to visit the device IP (default device ip: 192.168.1.200) to enter into the Homepage including
version of Top Board Firmware, Bottom Board Firmware, Software, Motor Firmware,
Hardware, serial number, Mac Address and Model, as the Figure A-1 shown:
1.Top Board
2.Bottom Board
3.Software Version
4.S/N
5.Model
6.Web App Version
Figure A - 1: Information on the Homepage of Websever.