Robopac Compacta S4, Use And Maintenance Manual

Page: 77 / 115

77
INFORMATION ABOUT THE USE ENG
6.3.3. OPERATOR AND PASSWORD CHANGE
Some settings can only be accessed by the
machine manager after entering the password
(editable), in order to prevent accidental changes
by unqualified personnel.
Caution - warning
The factory manager should assign the
passwords to authorised personnel
only and each password is to be
considered secret and confidential.
Operator change
Access the main page and:
1. Touch the (A) key to display the general
parameters page.
2. Touch the (A1) key to access the general
parameters page.
3. Touch the (B) key to change the reference
operator.
4. Enter the password (1111) assigned to
machine manager (B1).
B1) Machine manager (head of department).
B2) Assistance Service (dealer).
B3) Software administrator (Robopac).
Once the operator is changed and
confirmed
the (H) icon on the main page will become
that of the confirmed operator.
At this point, all protected functions are
unlocked and you can change some of the
settings, including the password.
Password change
1. Touch the key (C) to return to the general
parameters page.
2. Touch the (D) key to display the keypad, type
the new password and confirm by touching the
key (ENTER) (E).