Chapter 6
INFORMATION ON USE
-
22
-
English
C62
4151
100.fm
ID
M
6.3.
ELECTROMECHANICAL CONTROL DESCRIPTION
1a) "Cycle start" button
: to start the
automatic wrapping cycle.
1b) "Stop cycle" button
: to stop the
automatic wrapping cycle.
1c) "Reset" button
: either to reset the
machine before re-starting it after
an emergency stop, or to re-start the
machine after a stop caused by a
power supply interruption.
1d) "Carriage up/down" manual
selector
: to move the carriage
manually.
Since the selector is a presence-
selector, it will be possible to move it
only with the activated selection up
to the desired point.
1e) Main switch
: to turn the power
supply on and off.
Off: power off
On: power on
6.4.
SYNOPTIC PANEL DESCRIPTION
The LED indicates which part of the ma-
chine is in bad conditions. The abbrevi-
ation indicating the alarm appears on
the display (see § 8.1.).
2a) Emergency push-button pressed
:
indicates that the machine has been
stopped in emergency conditions
and the pushbutton has not been
released.
2b) "Emergency bumper" alarm
:
indicates that the machine has been
stopped because the bumper has
detected an obstacle within the
working area.
IDM-24126601501.tif
1a
1b
1c
1d
1e
IDM-24126601602.tif
2f
2e
2g
2b
2c
2a
2d
