Robomow RK1000, User Manual

Page: 54 / 86

52 53
Annex B - Test wire
position
1. While your mower is driving on the wire please observe for the following
possible situations:
a. Wire too close to obstacles
If the mower encounters an obstacle while following the wire, it will
maneuver around it. In these situations, adjust the wire further away
so that the mower will clear the obstacle without having to depart the
wire and navigate around it.
b. Wire too close to edge of lawn
If the mower falls off the edge of the lawn as it travels the wire,
adjust the wire further inward away from the edge.
c. Wire too far from obstacles and / or edge of lawn
Your mower has the unique ability to mow very close to obstacles
and the edge of your lawn. If you see areas where it would not mow
as close as you would like, simply adjust the wire further in. Just be
careful to avoid situations “a & b.”
d. Rough or challenging terrain
If you see areas where the mower appears to have limited traction
or is otherwise struggling to maneuver accurately, you should likely
adjust the wire around these areas. Very loose or sandy soil, rocky
or rooted terrain, and/or highly uneven surfaces can increase the
chances of your mower getting stuck and not reliably making it
back to the Base Station to charge every time. Areas that are very
challenging in dry conditions are likely to become much more so after
heavy rainfall.