manualshive.com logo in svg

Robomow RK1000, User Manual

Share
Download
Robomow RK1000 User Manual Download Page 11

10

11

Symbol

Description

WARNING — READ THE OPERATOR’S MANUAL(S) 
Read, understand and follow all the safety rules and instructions in the manual(s) and on 

the mower before attempting to operate this mower. Failure to comply with this information 

may result in personal injury or death. Keep this manual in a safe location for future and 

regular reference.
DANGER — AVOID AMPUTATION INJURY
Do not put hands or feet near or under the cutting deck. Contact with the blade can cause 

amputation of the hands and feet.

WARNING — AVOID CRASH/BLADE INJURY. KEEP A SAFE DISTANCE FROM THE 

MACHINE WHEN OPERATING.
Do not mow when children or others are around. To help avoid contact with the blade or 

a thrown object injury keep others away from the mower while it is in operation. Keep 

bystanders, children and pets inside while the mower is in operation. Stop the mower if 

anyone enters the area. 
WARNING — AVOID THROWN OBJECT INJURY
Keep bystanders at least 15’ (5 metres) from the mower during operation. Remove all 

stones, sticks, wire, toys and other foreign objects which could be picked up and thrown by 

the blade(s). Do not operate the mower without the cover door or safety devices being in 

their proper place and operational.
WARNING — AVOID CRASH/BLADE INJURY
Do not allow children to ride on the mower. It is not a toy.

WARNING
Turn the mower off before attempting to service it.

WARNING
Remove the disabling device before working on or lifting the mower.

WARNING – USE ONLY THE ORIGINAL POWER SUPPLY
Do not alter the power supply connection! Use only the original power supply unit provided 

by the manufacturer with the mower or as a spare part.  The correct part number is 

indicated on the product, on this label. A non-original power supply may result in fire and 

damage to the base station and the mower.
Never use a high-pressure power washer or hose to clean the mower. Water can damage 

components and the programmable controller. Use a damp cloth to wipe the display clean.

Symbol 

Definitions 

2

Summary of Contents for RK1000























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands