manualshive.com logo in svg

Robomow RK1000, User Manual

Share
Download
Robomow RK1000 User Manual Download Page 2

PB

1

EN v2

Safety First

IMPORTANT!
READ THESE INSTRUCTIONS AND SAFETY GUIDE CAREFULLY 

BEFORE USE. RETAIN FOR FUTURE REFERENCE

This product is an autonomous robotic mower, powered by a rechargeable 

lithium-ion battery and includes a base station.
The mower will independently depart from the base station, mow the 

lawn and return to the base station for charging.
A pre-installed perimeter wire connected to the base station sets the 

boundaries (a “virtual wall”) for the mower. It will be laid around the 

edges of the lawn and around objects that the mower should avoid.
The mower moves randomly within its working area, as defined by the 

perimeter wire.
The mower includes Bluetooth and GSM radio modules (on selected 

models).

Safe Operating Practices

1

2

3

Symbol Definitions

Safety Features

Annex A – Battery removal instructions

Do not allow children to use or operate the mower. 

Children must be supervised at all times.

Summary of Contents for RK1000























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands