Robo
Jet
Instrukcja obsługi | User Manual RoboJet
Wiso
31
CLEANING WINDOW
1.
Plugging in device
CAUTION
: Do not unplug device while it is cleaning
2.
Powering on
Move the Power Switch to the “I” position.
Device is powered on, when the device status
indicator flashes blue.
CAUTION:
Keep objects away from under
pressure turbine to avoid blockage.
3.
Place the device on the glass at least 10 cm
from window corners or other obstacles. If the
status indicator lights up blue, the device has
been positioned correctly.
CAUTION:
Please make sure there is a 13 cm clearance between the glass
and obstacles in the room like curtains or furniture
4.
Start the device using one of the following
methods. Press the START/STOP button on the
device or the remote control to start cleaning.
RoboJet Wiso will start detecting window frames
and adjusts the optimal cleaning mode.
5.
Choose your own cleaning path by pressing the
“N” or “Z” on the remote control.
▪
N cleaning mode
is best for tall windows.
Press N to choose this mode.
▪
Z cleaning mode
is best for wide windows. Press Z to choose this mode.
▪
There is also a
mode for stubborn dirt
. Press dedicated button to
choose this mode.
▪
In the
cleaning mode at the right edge
, the device will first search the
edge of the window. Press dedicated button to choose this mode.
6.
To stop the device during cleaning, press the START/STOP button robot or
remote control.
7.
You can change any directions and modes of the device using the remote
control during cleaning.
