Robo
Jet
Instrukcja obsługi | User Manual RoboJet
Wiso
34
PRODUCT MAINTENANCE
CLEANING THE DEVICE
CAUTION:
Clean the device regularly after each cleaning cycle. This is the
basic maintenance of Robot. Failure to do so may result in overload or
permanent robot damage.
Before cleaning the device you need to unplug it and remove it from the
window.
CLEANING CLOTHS
Turn the device over and detach the cleaning cloth from it. Wash the cleaning
cloth in a mild detergent and let it dry. The cleaning cloth should be completely
dry before restarting the device.
CAUTION
: Do not use a wet cleaning cloth as this may cause the robot to slip
on the window surface. It is recommended to wash the cleaning cloth
regularly. If the cleaning cloth is worn or will no longer fit properly, replace it
with a new one for best cleaning performance.
PRESSURE TURBINE
Turn the device over and wipe any debris from the vacuum generating turbine
to keep the suction surface well.
DRIVING THREADS
Turn the device over and slide the power switch to the "O" position and wait
until the under pressure turbine turns off. Press the "Wheel Clean" button on the
remote control to clean the wheels.
