11
4. CONTROLS
Button
Functions
Led
A
Speed
Turns the motor on/off at speed 1.
Led
A
lights up.
Press the button to deactivate any speed.
-
With the motor turned off:
Saturation of the grease filters takes place after 100
hours of continuous operation of the hood.
Flashes once a second.
With the motor turned off:
Saturation of the activated charcoal filters takes place
after 200 hours of continuous operation of the hood.
Flashes once
every 0.5 seconds.
B
Speed
Turns the motor on at speed two.
Leds
A+B
light up.
Press and hold the button for approximately 2 seconds,
with all the loads turned off (Motor+Lights), to turn the
Activated Charcoal Filter alarm on.
To turn it off, press and hold the button again for 2
seconds.
On:
LED
(A)
flashes twice.
Off:
LED
(A)
flashes once.
C
Speed
Turns the Motor on at speed three
Leds
A+C
light up.
Press and hold the button for approximately 2 seconds,
with all the loads turned off (Motor+Lights), to reset the
grease and activated charcoal Filter alarm.
LED
A
flashes three times.
D
Speed
Turns the motor on at
Intensive
speed. This speed
is timed to run for 6 minutes.
At the end of this time, the system returns automati-
cally to the speed that was set before.
If it is activated with the motor turned off, at the
end of the time the hood will switch to OFF.
Press button
D
or button
A
to turn the function off.
LEDs
A
and
D
light up, but LED
D
flashes to indicate that the function
is on.
E
Light
Press briefly: Turns the lighting system on and off at
maximum intensity.
Led
E
lights up.
5. LIGHTING
• For replacement contact technical support
(“To purchase contact technical support”).
A
B
C
D
E
