11
2.5 D/R
D/R is used to change the action range of steering
servo when turning the steering wheel. Increasing D/R
will make the steering wheel action more sensitive.
•
D/R adjusting value range: 0-120%,
•
POS0 default value is 100%,
•
POS1 default value is 70%.
•
Press the ST.D/R dial to select POS0 or POS1,
and the value will display in the LCD when it is
on the main screen.
1. Press "ENTER" to see FUNCTION MENU.
2. Press “+” or “- “ to choose D/R and press "ENTER"
to enter D/R adjusting interface.
3. Press "+" to increase and to decrease D/R value.
4. Press "EXIT" to save your setting and leave D/R
interface, and back to the function menu interface.
TERMS: POS-POSITION
2.6 S_TRIM
Use this function to adjust the neutral position of
the steering and throttle servos.
Tip:
When installing a new servo always ensure that it is
already in the neutral position!
SUB TRIM adjusting value range: -100-100
Default is 0
1. Press "ENTER" to see FUNCTION MENU.
2. Press "+" or "-" to choose TRIM, and press
"ENTER" to enter SUB TRIM adjusting interface.
3. Press "+" to increase and "-" to decrease SUB TRIM value.
4.Press "EXIT" to save your setting and leave SUB TRIM interface, and back to the
function menu interface.
TERMS: ST-STEERING, TH-THROTTLE
Summary of Contents for R01502
Page 8: ...8 2 2 Menu introduction ...
Page 9: ...9 ...
