PART 1. INSTALLATION
1. CONDITIONS OF INSTALLATION
This appliance is for use on natural gas only.
It is the law that all gas appliances are installed by a competent person (
) in accordance with the Gas Safety (Installation and Use) Regulations. Failure to
install appliances correctly could lead to prosecution. It is in your own interests and that of
safety to comply with the law.
The installation must also be in accordance with these installation instructions, all the relevant
parts of the local and National Building Regulations and all relevant recommendations of the
following British Standard, and “in accordance with the rules in force”.
BS.5871:Part 1, BS.5440:Part 1, BS.5440:Part 2, & BS.6891
2. PACKAGING
The heater is packed in a carton together with the following items:
(1) Standard Flue assembly, complete with sealing tape.
(2) Gasket pack comprising flue and air duct gaskets and flue sealing gasket.
(3) Flue sealing ring.
(4) Flue cover plate.
See Fig. 2 for items 1 to 4.
(5) Thermostat and Control Knobs.
(6) Pack of fittings comprising:
2 off - Top spacing brackets
999255
3 off - Wall fixing screws (2in wood)
810500
1 off - Bottom spacing bracket
999256
3 off - Wall plugs
810813
3 off - M5 x12mm screws
810510
2 off - No.6 x 8mm self tap screws
810776
3 off - M5 nuts
810552
6 off - M5 plain washers
810446
3 off - M5 Lock washers
810319
6 off - M4 x 10 Taptite screws
810327
(7)
emplate, representing the heater full size, indicating the position of
the air inlet duct and fixing screw positions (see Fig. 3).
a Gas Safe registered
Engineer
These Instructions and a t
GASKET
GASKET
SCREW
SCREW
SCREW
FLUE SEALING TAPE
FLUE SEALING
GASKET
OUTER AIR
DUCT
FLUE SEALING
RING
FLUE COVER PLATE
(flange against wall)
INNER AIR DUCT
FLUE DUCT
FIG 2
WALL PLUG
TERMINAL
FOAM SEALING STRIP
TERMINAL GUARD
(OPTIONAL EXTRA)
