2
Overview
Contents of Packaging / Key Parts
Pre-installation
Important:
Before you start to install your Robinhood Scrapeater, please read through the entire instruction manual
thoroughly. The set of instructions provided is general: local building codes take precedence over the instructions
in this guide and your installation must conform to the building codes in your area. Be sure to retain this set of
instructions for future reference.
Typical equipment required:
1.
Philips and flat blade screwdrivers
2.
Hammer
3.
Channel lock pliers, slip joint
4.
Screwdriver
5.
Adjustable pipe wrench
Materials & Accessories
1.
Petroleum jelly, liquid soap or cooking oil
2.
Hose clamp (optional)
3.
Dishwasher drain connector (optional)
4.
Plumbers Tape
1. PLUG WITH BRUSH
(Not Shown)
2. STAINLESS STEEL SINK FLANGE
3. TRIPLE POINT MOUNTING BRACKET
4. MOUNTING RING
5. SPLASH BAFFLE
6. MAIN BODY
8. WASTE PIPE RUBBER SEAL,
MOUNTING BRACKET & SCREWS
7. DISHWASHER CONNECTION
(Optional)
9. WASTE PIPE ELBOW
10. RESET BUTTON (Not Shown)
11. AIR SWITCH CONNECTION (Not
Shown, Optional)
