6
Installation Instructions- Upside down
This dryer can be installed upside down if required. Please follow
below instructions:
1.
Take off the rubber plugs on the top of the unit (See Fig 6).
Then take off the four legs from the bottom (See Fig 7).
2.
Put the dryer up-side-down and install the four legs at the
bottom (Top side of the original dryer, see Fig.8). Push
rubber plugs inside holes on the top of the dryer (Bottom of
the original dryer, see Fig.9)
3.
There is an additional control panel sticker in the accessories
bag. Rip the protected paper and stick it over the existing
panel, see Fig.10.
The upside down dryer can also be wall mounted by following “Installation Instruction” and “Wall
Mounting Instruction” on previous page.
