17
Troubleshooting
Alarm Problem
Alarm Reason
Release
“ E30 ”
Heating problem
Please contact your local service center if the problem persists.
“ E32 ”
Humidity sensor error
“ E33 ”
Temperature sensor error
•
Only authorised technicians can carry out repairs.
•
Before you call service, please check if you have dealt with the fault yourself or if you
have followed the user instructions.
•
A technician will charge you for advice, even during the warranty period.
Problem
Solution
•
Display does not on
•
Check if the power supply works.
•
Check if the mains plug is inserted.
•
Check the selected program.
•
Press the
【
On/Off
】
button.
•
“
”is lighting
•
Empty water container.
•
If the light is still on, please call the service.
•
“
”is lighting
•
Clean heat exchanger.
•
Clear lint filter.
•
Dryer does not start
•
Check the door has closed.
•
Check the program has set.
•
Check the start button has selected.
•
Degree of dryness was not
reached or drying time too
long
•
Clean lint filter and heat exchanger.
•
Empty container.
•
Check drain hose.
•
Dryer installation place is too restricted.
•
Clean the moisture sensors.
•
Keep the Air inlet clean.
•
Use higher drying intensity level program or time
program.
If you cannot deal with the fault by yourself and need help:
•
Press the
【
On/Off
】
button.
•
Pull out the mains plug and call the service
Warning!
Warning!
