5
Installation
Technical Information
Model
HIB604TFG
Width
580mm
Rated Voltage
220-240Vac 50/60Hz
Type of switch
Electronic Sensors
Cooking zones:
Front left
165mm, 1500W
Rear left
200mm, 2000W
Front right
200mm, 2000W
Rear right
165mm, 1500W
Total power
7000W
Basic adjustment of the sensors to the environment
Upon each connection to the power supply the sensors of the appliance are automatically adjusted to the
environment to ensure their proper function, all displays turn on and are fully illuminated for a few seconds.
During the adjustment procedure the sensors must be free of any objects; the adjustment procedure will be
interrupted until such objects are removed from the sensor surface. During this period the regulation process of the
cooktop is impossible.
Hotplate functions
Ceramic glass cooktop is fitted with four hotplates. The cooktop surface is completely flat and smooth, without
edges to accumulate dirt.
The cooktop is fitted with high power induction hotplates. Heat is generated directly at the bottom of the dish, where
it is most needed, without any losses through the ceramic glass surface.
This way the required extent of energy is considerably smaller compared to traditional heaters, which operate on
radiation principle.
Glass ceramic hotplate is not heated directly, but by return heat transmitted by the dish. This heat figures as
“remaining heat” after the hotplate is turned off. The induction hotplate generates heat from the induction coil,
installed underneath the ceramic glass surface. The coil creates a magnetic field at the bottom of the dish (which
can be magnetized) which in turn originates whirling flows of current which then heat the hotplate.
Important:
In case sugar or other heavily sweetened substances are spilled on the hotplate, wipe them up immediately and
carefully remove the sugar residues with a scraper while the cooking zone is still warm; otherwise the hotplate may
be damaged.
Avoid cleaning the cooktop while the cooking zones are still hot, as you may damage the cooktop.
