8
Operating Instructions
Ceramic Glass Cooktop
1.
Induction hotplate rear left
2.
Induction hotplate rear right
3.
Induction hotplate front left
4.
Induction hotplate front right
5.
Cooktop control panel
Cooktop control elements
1.
Induction hotplate rear left sensor
2.
Induction hotplate rear right sensor
3.
Induction hotplate front left sensor
4.
Induction hotplate front right sensor
5.
Timer sensor
6.
Increase temp/time sensor
7.
Decrease temp/time sensor
8.
Key lock sensor
9.
Power on/off sensor
10.
Induction hotplate rear left display
11.
Induction hotplate rear right display
12.
Induction hotplate front left display
13.
Induction hotplate front right display
14.
Timer display
15.
Key lock indicator
16.
Power indicator
Turning the appliance on and off
With power connected to the appliance, the Key lock indicator (15) will be lit and the Power indicator (16) will be
flashing. This means the cooktop is in stand-by mode.
To turn on the appliance, first press the Key lock sensor (8) until the Key lock indicator turns off. Press the Power
on/off sensor to activate the appliance (the power indicator will be lit & the control panel is now ready to use). If
nothing is touched for 15 seconds, the Key lock will become active and the Power indicator will start flashing again.
Press the Power sensor at any time to turn off all hotplates and send the appliance into standby mode.
Key lock
The Key lock is used to lock all sensors (except the Power sensor to turn the appliance off). It automatically comes
on 15 seconds after the last sensor is touched. Press the Key lock sensor for 3 seconds to disable it.
