Instructions for use and maintenance
Enabling the timer
Select a cooking zone and select the required power setting (from 1 to 9).
Press
the “+” and “-“ keys (L/I) simultaneously. The timer display (M) will show “
30
”. The egg timer pilot light (M
2
) is
blinking.
Press
again the “+” and “-“ keys (L/I) simultaneously. The timer pilot light (M
1
) which correspond to the cooking area will
start blinking and The decimal point on the timer display (M
3
) comes on.
Adjust the time from 1 to 99 by means of the “+” key (I) and “
-
“ keys (L)
Press
again the “+” and “-“ keys (L/I) simultaneously to confirm the programming operation. The corresponding timer
pilot light (M
1
) will remain steady.
The timer will be assigned to that area: Once countdown is complete the area will switch off automatically. Once
countdown is complete an acoustic signal will sound for 30”.
Multiple timer programming
A heating zone is already programmed: the corresponding indicator light (M
1
) is on, and
the timer display (M) is activated. It starts flashing slowly as soon as you start to program
another heating zone.
Select the second heating zone and select the required power setting.
Press the “+” and “-“ keys (L/I) simultaneously, the relevant timer indicator light (M
1
) will blink.
Adjust the time from 1 to 99 by means of the “+” key (I) and “-“ keys (L).
Press again the “+” and “-“ keys (L/I) simultaneously to confirm the programming operation.
NOTE:
the timer indicator light related to the heating zone just programmed flashes slowly and then remain lit once the
time has been confirmed by pressing simultaneously
the “+” and “-“ keys (L/I).
Safety cutout
If one or more burners are accidentally left on, the control automatically
turns them off after a certain time has elapsed.
The table below indicates the time interval, which depends on the power
level setting.
If the safety cut-
out has tripped, the symbol “
H
” is displayed.
To avoid the automatic cut-out being tripped, simply touch the burner selection key or
the “
+
” or “
-
“ keys before the time runs out.
Level
Time limit (h/min)
1
8,40’
2
6,42’
3
5,18’
4
4,20’
5
3,32’
6
2,50’
7
2,19’
8
1,53’
9
1,30’