Robin America EH63, Service Manual

Page: 44 / 85

– 41 –
20) IGNITION COIL and WIRE CP
Temporally fit ignition coil to crankcase.
Adjust air gap between ignition coil and flywheel
using a thickness gauge and tighten bolts.
THICKNESS GAUGE IGNITION COIL
WIRE
COOLING FAN
M6 BOLT and
WASHER : 4 pcs.
21) COOLING FAN
Attach cooling fan onto flywheel.
M6 x 16 bolt & washer : 4 pcs.
Connect wiring from key switch to the primary
terminal of ignition coil.
Tightening torque
6.8 - 8.8 N
・
m
(70 - 90 kgf
・
cm)
(5.1 - 6.5 ft
・
lb.)
TO IGNITION COIL #1
TO IGNITION COIL #2
TO KEY SWITCH
WIRE CP
M6 x 30 bolt & washer : 4 pcs.
Ignition coil air gap
0.3 - 0.5 mm
(0.012 - 0.020 in.)
Tightening torque
6.8 - 8.8 N ・ m
(70 - 90 kgf ・ cm)
(5.1 - 6.5 ft ・ lb.)