Using the SC-888 as a Single Speed Timer
Upon Reset, the middle row will show the distance entered.
From Reset, press (A) to start timing. “RUN” appears. Then, press (B) to record lap readings. The lap
number and time will appear in the top row and the lap speed will appear in the middle row. The running
time of the current lap will appear in the bottom row.
Continue to press (B), as necessary, to record lap readings. You may take up to 1000 lap readings. Please
note the lap counter will display the last completed lap number, i.e., if the lap counter shows 044, then the
bottom row will display the current running time for lap 045.
Press (A) to stop the timer upon completion of the last lap. “STOP” appears. Press (B) to Reset.
Using the SC-888 as a Double or Triple Speed Timer
Use pushbutton (A) for Speed Timer #1
Use pushbutton (B) for Speed Timer #2
Use pushbutton (C) for Speed Timer #3
(C)
•
Speed Timer #3 –
Bottom Row
(B)
•
Speed Timer #2
•
Resets/Clears All
Timers
Identifies the location of
Speed Timer 1, 2 & 3
(A)
•
Speed Timer #1 – Top Row
•
In “ALL”, Starts All Timers
As a
Double
Speed Timer, the bottom row will display the lap times associated with Speed Timer #1.
Simultaneous Start – All Start Together
Should you want to start all speed timers at the same time, select “ALL” during the set-up procedure.
“SEP” will disappear.
Press (A) to start timing. Then, press (A) for Speed #1, (B) for Speed #2 and (C) for Speed #3. The lap
time will appear for two (2) seconds and then the lap speed will appear in mph/kph for 15 seconds. You
may press (E) to release the frozen speed display to the current running lap time.
