11
1.
Press
MENU
.
2.
Press and hold
TECHNICIAN SETUP
for 3 seconds.
3.
Configure the installer options as desired using the table below.
4.
Use
or
to change settings and the
NEW STEP
or
PREV STEP
to move from one
step to another. Note: Only press
DONE
when you want to exit the Installer Setup options.
INSTALLER SETUP
Settings
Display Adjustment Options
Default
Setup WiFi
WiFi router parameter configuration
Filter Change
Reminder
This setting will flash
FILT
in the
display after the elapsed run time
to remind the user to change the
filter. The
OFF
setting will disable
this feature.
The filter change reminder can be
adjusted from
OFF
to 2000 hours
in 50 hour increments. Press the
second button from the top left side
of the thermostat to display the
current filter elapsed run time.
OFF
Room
Temperature
Calibration
This setting allows the installer to
change the calibration of the room
temperature display so that, for
example, the thermostat would read
74°F instead of 70°F.
The room temperature display
can be adjusted to read 4° above
or below the factory calibrated
temperature.
0
Summary of Contents for RS10420T
Page 1: ...RS10420T Installation Manual ...
Page 2: ......