What are the INSTALLER settings?
The INSTALLER SETTINGS are set up during the initial installation. They tell the thermostat how to function with your heating or
cooling equipment. The following is a brief overview and discussion of these settings.
SYSTEM SETUP
Choose the system component which the thermostat will control.
This screen appears only on models 9700i and 9701i.
1st STAGE HEATING
The 9701
i
and the 9715
i
can have a gas/oil or electric first stage heating.
Choose the energy source for 1st stage heating.
19
INSTALL MENU
SELECT
1ST STAGE HEATING
GAS / OIL
ELECTRIC
HOME
SELECT
INSTALLER SETTINGS
INSTALLER SETTINGS
INSTALLER SETTINGS
HOME
MAIN MENU
SELECT
SELECT
SYSTEM SETUP
GAS
RESIDUAL COOL
60
AUTO CHANGEOVER
OFF
EER
ON
DEADBAND
3˚F
SECURITY
OFF
CONTACT INFO
SERVICE INT
CONTACT INFO
SERVICE INT
REMINDER
RUN
TEMP OFFSET
0.0°F
INSTALL MENU
SELECT
SYSTEM SETUP
FURNACE
HEAT PUMP
110-1023E.qxd 11/18/04 10:50 AM Page 19
