77
Setting the alarm clock
Your radio has two separate alarms which can be set to wake you to either
the radio or a buzzer alarm. In the event of a power interruption your radio
has built in memory that will retain your alarm settings.
Ensure that the time is set correctly before setting the alarms.
Alarms can be set while the radio is in Standby mode or switched on.
1. To change the states of the alarms
while the radio is in Standby
press
the
Mode/Alarm
button. The display will cycle through No Alarm, Alarm
1 enabled, Alarm 2 enabled or Alarms 1 and 2 enabled.
2. To change the detailed alarm settings while the radio is in Standby press
and hold the
Mode/Alarm
button. This will cause the Alarms menu to be
displayed. Then skip to step 5 below.
3. Alternatively, you may change the alarm settings while the radio is switched
on. Press the
Menu
button to access the menu for the current mode.
Rotate the
Tuning/Select
control until
'Main menu'
is highlighted on the
display. Press the control to enter the 'Main menu'.
4. Rotate the
Tuning/Select
control until
'Alarms'
is selected on the display.
Press the control to see the current alarm settings. If no change is required,
press the
Menu
or
Back
buttons to exit.
5. Rotate the
Tuning/Select
control until the desired alarm (1 or 2) is
highlighted on the display. Press the control to enter alarm setup.
6. Rotate
the
Tuning/Select
control until
'Time'
is highlighted on the display.
Press the control to adjust the alarm time.
7. Rotate the
Tuning/Select
control to choose the alarm hour. Press the
control to con
fi
rm the setting.
DAB
FM
AUX in
Sleep
Alarms
System settings
Main menu
Alarm 1: Off [00:00]
Alarm 2: Off [00:00]
Alarms
Enable: Off
Time: 00:00
Mode: Buzzer
Volume: 20
Save
Alarm 1
07
: 00
Alarm 1 time
1
07:30
2
08:30
3-7
1,2
3
Summary of Contents for Stream 207
Page 106: ...103 Notes ...