15
Key:
0 1 2 3 4 5 6
7 8 9 . _ - @
, a b c d e
f g h i j k l
m n o p q r s
123- jones
Setup wizard
Setup wizard
completed
Press ‘SELECT’ to exit
Internet radio
Spotify
Music player
DAB
FM
AUX in
Main menu
Network settings
Please wait
Connecting...
Connecting to your computer network - cont.
WEP keys are 10 or 26 characters long (using 0 - 9, and A - F). Some wireless
routers can also use pass-phrases for WEP but these are not supported by your
radio. WPA keys are usually set up using a pass-phrase of between 8 and 63
characters. Your radio accepts pass-phrases for WPA keys.
9. To enter the WEP or WPA key, characters are selected and entered using the
Tuning/Select
control. As you rotate the control, the highlight scrolls through
the available characters as well as the three controls on the right. The character
currently highlighted will be entered when you press the
Tuning/Select
control.
Do this as needed until the complete key has been entered.
Remember, WEP
keys only use the numbers 0-9 and letters A-F. WPA keys are sensitive to upper
and lower case characters. You must enter the key
exactly
or the radio will not
connect to the network.
The three controls on the right-hand side of the screen have special functions. You
can quickly access these by pressing the
Info
button and then use the
Tuning/
Select
control as needed. See also 'Text Entry' on page 8.
select
'
' to erase a character just entered (long press to clear)
select
'
' when the complete key has been entered
select
'
' to cancel and re-run the Network Wizard
If a WEP or WPA key has previously been entered for the selected SSID then the
display will show
'Key: [Set]'
. If you have previously entered a different key, you must
clear this by selecting the '
' symbol. This will remove the
'[Set]'
indication.
After
the
fi
nal character of the WEP or WPA key has been entered, highlight the '
'
symbol and press the
Tuning/Select
control
.
The screen will show
'Connecting...'
and then
'Setup wizard completed'.
Press the
Tuning/Select
control to the exit
setup wizard. The radio should now be able to connect to the network.
10. Once connected to the network (and therefore also to the internet) your radio will
display the main menu. Press and release the
On/Standby
button
to put the radio
into Standby mode. If the radio is powered from the mains adaptor it should then
display the time as obtained from the Internet. If the time displayed is not correct
for any reason, it can easily be adjusted later, see page 75, 'Manually setting the
clock'.
9-10
10
9
Summary of Contents for Stream 207
Page 106: ...103 Notes ...
