53
Setting the alarm clock
Your radio has two separate alarms which can be set to wake you to either
the radio or a buzzer alarm. In the event of a power interruption your radio
has a built in memory that will retain your alarm settings.
Ensure that the time is set correctly before setting the alarms. Alarms
cannot be used when running on batteries as the clock is reset from the
internet and does not run in battery mode.
1. With your radio switched on, press and hold the
Menu
button to access
the menu for the current mode. Rotate the
Tuning/Select
control until
'Main menu'
is highlighted on the display. Press the control to enter
the 'Main menu'.
2. Rotate the
Tuning/Select
control until
'Alarms'
is selected on the
display. Press the control to see the current alarm settings. If no change
is required, press the
Menu/Back
button to exit.
3. Rotate
the
Tuning/Select
control until the desired alarm (1 or 2) is
highlighted on the display. Press the control to enter alarm setup.
4. Rotate the
Tuning/Select
control until
'Time'
is highlighted on the
display. Press the control to adjust the alarm time.
5. Rotate
the
Tuning/Select
control to choose the alarm hour. Press the
control to con
fi
rm the setting.
6. Rotate
the
Tuning/Select
control to choose the alarm minute. Press
the control to con
fi
rm the setting. The display will then return to the
alarm setting menu.
If the radio has been set to use a 12 hour clock format, there will also
be an option here for setting AM or PM for the alarm time.
1,2
1-6