8
Selecting a station - DAB
1. Press the
On/Off
button
to switch on your radio. The radio will beep to confirm
that it is now switched on.
2. If DAB mode was used last then the radio should briefly display 'DAB radio'. If
the radio is not in DAB mode then press the
Tuner
button to select DAB mode.
3. Press the
Tuning Up
or
Down
buttons
to step through the list of available stations.
4. Press
Select
to select and tune to the desired station.
5. Adjust the
Volume
and
Tone
controls as needed.
Note:
If after selecting a station the station does not tune, it may be necessary
to relocate your radio to a position giving better reception.
Secondary services - DAB
Some radio stations may have one or more additional broadcasts associated with
them. If these are available, they will appear immediately after the main station as
you press the
Tuning Up
button. To tune to the selected service, press
Select
.
Finding new stations - DAB
As time passes new stations may become available or you may have moved your
radio to a different part of the country. In this case you may need to cause your radio
to scan for new stations.
1. Press
On/Off
to switch on the radio.
2. Repeatedly, press the
Tuner
button until the '
DAB'
mode is selected.
3.
Apply a long press
on the
Tuning Up
or
Down
buttons until
'Scanning'
shows
on the display. If the tuning tone volume is not set to minimum a double beep
will indicate the start of scanning.
4. Your radio will perform a scan of the Band III DAB channels. As new radio stations
are found the station counter on the display will increase and a list of the radio
stations found will be stored in the radio.
On/Off
Tuner
Tuning / Album
Info.
Select
Station list
<BBC R2
>
BBC Radio 2
Connecting...
DAB radio
Scanning 28
