5
Operating your radio - DAB
1. Carefully extend the telescopic aerial. The aerial should be fully
extended and positioned vertically for optimum reception.
2. Press and release the
On/Off
button to switch on your radio. The
display will show
'WELCOME'
for a few seconds. After each use the
radio will remember the mode used and then switch on in that mode
the next time that it is used.
3. If this is the
fi
rst time the radio is used a scan of the Band III DAB
channels will be carried out. This is known as 'Auto tune'. If the radio
has been used before the last used station will be selected.
4. During Auto tune each group of stations will be detected and the station
count will be updated.
5. When the Auto tune is completed the
fi
rst station (in numeric-alpha
order 0...9...A....Z) will be selected. The
fi
rst station in the list of stations
found will be played.
6. If no stations are found then
'OFF AIR'
will be displayed and it may be
necessary to relocate your radio to a position giving better reception.
You should then carry out an auto tune to
fi
nd stations as described
on page 9 (see
Finding new stations
on page 9).
7. Adjust
the
Volume, treble
and
bass
controls
to the required setting.
•
Your radio has an indicator
on the display to indicate the strength
of the DAB radio signal being received.
2
7
7
7
