Manual tuning - FM
1. Carefully fully extend the telescopic aerial located on the rear of your
radio.
2. Press and release the
On/Off
button to switch on your radio.
3. Press and release the
Mode
button until the FM mode is selected.
4. Rotate the
Tuning
control or press and release the
Tuning Up
or
Down
buttons to tune to a station. The frequency will change in steps
of 50kHz.
If the radio is tuned to a station of suf
fi
cient signal strength with RDS
information present, then the display may change to show the station
name.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Set
the
Volume, treble
and
bass
to the desired setting.
7. To switch off your radio press and release the
On/Off
button.
15
Mode
3
4
4
4
2,7
6
6
6
If you
fi
nd that an FM broadcast has a lot of background hiss, this may
often be reduced by setting the radio into Mono reception mode for the
current FM station. Please refer to the section 'Stereo / Mono setting - FM'
on page 18 for further details.
