background image

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)

12

Prune stations - DAB

Over time, some DAB services may stop broadcasting, or may change 
location and then not be able to receive a station. In order to remove such 
stations from the DAB station list, the Prune stations function will delete 
the DAB stations from your station list that can no longer be received.
Stations which cannot be found or which have not been received for a very 
long time are shown in the station list with a question mark.

1.  Press and release the 

On/Off 

button to switch on your radio.

2.  Repeatedly, press and release the 

Mode 

button until the DAB mode 

is selected.

3.  Press and release the 

Menu 

button. The DAB menu will show on the 

display.

4. Rotate 

the 

Tuning 

control

 

until 

'PRUNE'

 appears on the display.  Press 

and release the 

Tuning 

control.

5. Rotate 

the 

Tuning 

control to select 

'Y'

. Press and release the 

Tuning

 

control to cause the stations list to be pruned, eliminating unavailable 
stations.

6.   If you do not wish to prune stations select 

'N'

 in step 5 and then press 

and release the 

Tuning

 control. The display will revert back to the 

previous display.

 

Note:

 If you have moved to a different part of the country you should 

also carry out a search for new stations (please see the section 'Finding 
new stations' on page 9).

4-6

1

2

3

Summary of Contents for Blutube 50













































Reviews: