Roberts Gorden BZC 100 Operation Manual Download Page 15

11

SECTION 5: THE ROBERTS GORDON

®

BZC

CONTROLLER WARRANTY

ROBERTS-GORDON WILL PAY FOR:

For 36 months from the date of purchase by the original
consumer or 42 months from date of shipment by Roberts-
Gordon, whichever occurs first: we will provide, free of
charge, replacement parts for any part of the ROBERTS
GORDON

®

BZC Controller that fails because of a manufac-

turing or material defect.

ROBERTS GORDON

®

replacement parts are warrantied for

the period of the original ROBERTS GORDON

®

BZC

Controller Warranty.

ROBERTS-GORDON WILL NOT PAY FOR:

Service trips, service calls and labor charges.

Shipment of replacement parts.

Damage due to:

Failure to install, operate or maintain the ROBERTS
GORDON

®

BZC Controller as directed in the Installation

and Operation Manuals. You must follow requirements
printed in these manuals.

Misuse, abuse, neglect or modification of the
ROBERTS GORDON

®

BZC Controller in any way.

Improper service, use of replacement parts or acces-
sories that are not specified by Roberts-Gordon.

Improper installation, or any relocation of the
ROBERTS GORDON

®

BZC Controller after initial instal-

lation.

Incorrect supply, accident, fire, flood, acts of God or
other casualty.

Use of the ROBERTS GORDON

®

BZC Controller for

other than its intended purpose.

Use of the ROBERTS GORDON

®

BZC Controller in a

corrosive atmosphere or any atmosphere containing
contaminants.

Shipping. Claim must be filed with carrier.

WARRANTY IS VOID IF:

The ROBERTS GORDON

®

BZC Controller is not installed

by a electrician qualified in the installation of control sys-
tems for heating equipment. 

You cannot prove original purchase date and required
annual maintenance history.

The data plate and/or serial number are removed, defaced,
modified or altered in any way.

The ROBERTS GORDON

®

BZC Controller is transferred.

This warranty is nontransferable.

Roberts-Gordon is not permitted to inspect the damaged
ROBERTS GORDON

®

BZC Controller and/or component

parts.

READ YOUR INSTALLATION MANUAL

If you have questions about your ROBERTS GORDON

®

BZC Controller, contact your installing professional. Should
you need replacement parts or have additional questions,
call or write Roberts-Gordon: 

U.S.A.
1250 William Street
P.O. Box 44
Buffalo, New York  14240-0044
Telephone: 716.852.4400
Fax: 716.852.0854

Canada
241 South Service Road, West 
Grimsby, Ontario  L3M 1Y7 
Telephone: 905.945.5403
Fax: 905.945.0511

On the web at:
www.rg-inc.com

Roberts-Gordon's liability, and your exclusive remedy,
under this warranty or any implied warranty (including
the implied warranties of merchantability and fitness
for a particular purpose) is limited to providing replace-
ment parts during the term of this warranty. 
Some juris-
dictions do not allow limitations on how long an implied war-
ranty lasts, so this limitation may not apply to you. There are
no rights, warranties or conditions, expressed or implied,
statutory or otherwise, other than those contained in this
warranty.

Roberts-Gordon shall in no event be responsible for
incidental or consequential damages or incur liability
for damages in excess of the amount paid by you for
the ROBERTS GORDON

®

BZC Controller. Some jurisdic-

tions do not allow the exclusion or limitation of incidental or
consequential damages, so this limitation or exclusion may
not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from
jurisdiction to jurisdiction.

Roberts-Gordon shall not be responsible for failure to per-
form under the terms of this warranty if caused by circum-
stances out of its control, including but not limited to fire,
flood, strike, government or court orders, unavailability of
supplies, parts or power. No person is authorized to assume
for Roberts-Gordon any other warranty, obligation or liabili-
ty.

LIMITATIONS ON AUTHORITY OF REPRESENTATIVES:

No representative of Roberts-Gordon, other than an
Executive Officer, has authority to change or extend these
provisions. Changes or extensions shall be binding only if
confirmed in writing by Roberts-Gordon's duly authorized
Executive Officer.

S

ECTION

5: T

HE

R

OBERTS

G

ORDON

®

BZC C

ONTROLLER

W

ARRANTY

Summary of Contents for BZC 100

















Reviews: