EN
EN - 29 -
6.2 Analysis
In case of problem, contact RJ distributor with the following information:
• Model, version and serial number of the product.
• From the menu status:
- Software version
- LED board IDs
- Device hours
• Description of the problem.
How to remove the Sully LED compartment for cleaning:
1. We recommend you place your luminaire on a flat clean surface.
Disconnect from the mains before servicing.
2. Unlock the quarter turn screw with a flat screwdriver.
3. Remove the two screws with a flat screwdriver.
4. Slightly slide out the LED compartment and remove the earth attachment before
removing it completely from it's housing.
5. Carefully place the LED compartment on a flat clean surface.
Sully LED compartment installation:
6. Extend the hinge to its maximum position to make it easily accessible.
Insert the LED compartment into your luminaire, making sure it is positioned vertically
to enable the LED compartment to enter the lamp house correctly.
7. Connect the ground connection (faston tab terminal) to the Sully LED compartment.
8. Once the LED compartment is fully inserted, remount tightly the two screws nearest
the shutter gate. Re-tighten the quarter turn screw located at the back of the lamp base
to lock the LED compartment securely into your luminaire.
