Robe Robin SuperSpike, User Manual

Page: 4 / 47

4
Air vents and slots in the fixture´s head and base are provided for ventilation, to ensure reliable operation of
the device and to protect it from overheating.
Do not block the front lens with any object when the fixture is under operation.
The openings should never be covered with cloth or other materials, and never must be blocked.
This fixture should not be placed in a built-in installation unless proper ventilation is provided.
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened.
Always use a secondary safety cable when rigging this fixture.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the fixture.
The fixture becomes very hot during operation. Allow the fixture to cool approximately 20 minutes prior to ma -
nipulate with it.
Operate the fixture only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the fixture. Most damages are the result of unprofessional operation!
Please use the original packaging if the fixture is to be transported.
Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short -
-circuit, burns, electric shock, crash etc.
To avoid damage of the internal optical system of the fixture, never let the sunlight or
other fixture lights directly to the front lens , even when the fixture is not working !
Be carefull when the fixture performs fast pan and (or) tilt movement.
There is a danger of injury of your hands (especially fingers).
Always push the zoom module into the head before inserting the fixture into the flight
case.
Insert the fixture into the flight case with caution!