Robe Robin SuperSpike, User Manual

Page: 26 / 47

26
step by touching the [copy]. By touching the text box "Preview" next to the current program step you
can view created scene.
6. Repeat the steps 4 and 5 for next program steps.
7. After editing desired program steps, adjust the length of the program by touching the text boxes "Start Step"
and "End Step".
Meaning of the icons used in the "Edit Program" menu:
- moves down on the next page - saves adjusted values and leaves menu
- moves up on the previous page - saves values to the current step and copy them to the
following prog. step
- leaves menu without saving values
6.6 Tab "Service"
Adjust DMX Values - The menu allows you to set all effects to desired positions before fine calibration of the
effects .
Calibrations - This menu enables fine calibration of fixture effects and download default calibration values.
Calibrate Effects
- The menu allows the fine adjustment of effects.
Pan
- a pan position fine adjustment
Tilt
- a tilt position fine adjustment
Rot. Gobo Wheel - a fine movement of module of rotating gobos
R. Gobo Index 1 - a fine rotation of the rotating gobo 1
R. Gobo Index 2 - a fine rotation of the rotating gobo 2
Rod Rotation - a fine rotation of the rod
Prism 1 - a fine movement of the prism module
Prism 2 - a fine movement of the prism module
Prism Rot. - a fine rotation of the prism
F. Frost 1 - a fine movement of the small frost above rod
F. Frost 2 - a fine movement of the small frost above rod
Frost 1 - a fine movement of the frost module
Frost 2 - a fine movement of the frost module
Zoom - a fine movement of the zoom system
Calibration of the effects via the control board
1. Disconnect DMX controller from the fixture and enter the "Calibrate Effects" menu.
2. Use the [up arrow] and [down arrow] to find "Pan" and touch it to enter the fine effect adjustment screen.
3. Set desired value and save it by touching the [confirm].
4. Repeat steps 2 and 3 for next item
5. After calibrating all effects, touch the [confirm] to save all adjusted values and reset the fixture.
Calibrate Colours - The menu serves for adjusting of LEDs saturation to achieve uniform white colours
Red - a red LEDs saturation fine adjustment
Green - a green LEDs saturation fine adjusment
Blue - a blue LEDs saturation fine adjustment
White - a white LEDs saturation fine adjustmentt
Calibration of white colours via the control board
1. Disconnect DMX controller from the fixture , open shutter and dimmer and set the CTC channel
to DMX=64 (white 5600K), RGBW channels to 255 DMX and Zoom channel to 128 DMX.
2. Set the following items in the menu Personality:
White Point 8000K =On
Colour Mixing Mode=RGBW
3. Aim the light beam on the lux meter (e.g. Minolta CL-70F- Chroma meter) which is placed at
min. distance of 3 m from the fixture.
4. Enter the menu Calibrate Colours.
5. By means of the Red, green, Blue and White items adjust the 5600K colour temperature as exactly as
possible (∆u´v´= 0).
6. After adjusting 5600K colour temperature, touch the [confirm] to save all adjusted values and reset
the fixture.