Robe Robin SuperSpike, User Manual

Page: 34 / 47

34
10. Maintenance and cleaning
DANGER !
Disconnect the fixture from the mains before starting any
maintenance work
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances
should solvents be used!
Never use solvents for cleaning the the fixture
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build
up on or within the fixture. Otherwise, the fixture‘s light-output will be significantly reduced. Regular cleaning will
not only ensure the maximum light-output, but will also allow the fixture to function reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances
should solvents be used!
Front lens may require weekly cleaning as smoke-fluid tends to building up residues, reducing the light output
very quickly. The cooling fans should be cleaned according to the situation (at least annually).
The interior of the head and base should be cleaned at least annually using a vacuum-cleaner.
Important! Check the air filter in fixture base periodically and clean before it
becomes clogged!
Periodically clean air filter placed in the fixture´s base. The air filter cover is fastened by means of magnets.
Use a vacuum cleaner, compressed air or you can wash them and put back dry.
After replacing the air filters, reset the elapsed time counter in the menu "Information" (Information--->Air
Filters---> Elapsed Time).
More complicated maintenance and service operations are only to be carried out by authorized distributors.
10.1 Replacing the fuse
Before replacing the fuse in the fixture, unplug mains lead!
Before replacing the fuse, unplug mains lead.
1) Remove the fuse holder on the rear panel of the base with a fitting screwdriver from the housing
(anti-clockwise).
2) Remove the old fuse from the fuse holder.
3) Install the new fuse in the fuse holder (only the same type and rating).
4) Replace the fuseholder in the housing and fix it.
10.2 Disposing of the product
To preserve the environment please dispose or recycle this product at the end of its life according to the local
regulations and codes.