Robe Robin square, User Manual

Page: 22 / 40

Init Effect Positions - Use the menu to set all effects to the desired positions at which they will stay after
switching the fixture on without DMX signal connected.
Screen Settings
- Use this menu to change the touch screen settings.
Display Intensity
- The item allows to control the intensity of the screen (1-min., 10-max.).
Screen saver Delay
- The item allows you to keep the screen on or to turn it off automatically after 1-10
minutes after last touch (or pressing any button on the control panel).
Touchscreen Lock
- The item allows you to lock the screen after last touch (or pressing any button on the
control panel). The time delay can be set in range of 1-10 minutes.To unlock the screen, press the
[ENTER/Display On] button.
Recalibrate Touchscreen - The item starts calibration of the touchscreen. Follow the instructions on
the screen.
Display Orientation - The menu allows to change display orientation.
Normal - Standard display orientation if the fixture is placed horizontally (e.g. on the ground).
Inverted - Inverted orientation (needed if the fixture is hanging on the truss).
Auto - The option activates a gravitation sensor for automatic screen orientation.
Note:
Auto
option is set as default. You change the display orientation by touching the icon on the display,
an the option set in the "Display Orientation" menu is temporarily overriden.
Temperature unit - Use the menu item to change temperature unit from °C to °F.
Fan Mode - Use the menu to set the fixture fans to max. power mode (" High ") or to auto-control mode
(" Auto ").
Law.
Date & Time Settings - Use this menu to set current date and time for the fixture log system (menu "View
Logs"). Set this menu item before first fixture operation.
Default Settings
- The menu item allows to set all fixture parameters to the default (factory) values.
7.4 Tab "Manual Control"
Reset Functions
- The menu allows to reset the fixture either per function modules or all modules together.
Total System Reset
- The item resets all function modules.
Pan/Tilt Reset
- The item resets a pan and tilt movement.
Zoom Reset
- The item resets zooms 1-5.
MBE Reset
- The item resets MBE effects 1-9.
Manual Effect control
- Use the menu to control all fixture channels by means of the control panel.
7.5 Tab "Stand-alone"
Test Sequences - Use the menu to run a test/demo sequences without an external controller, which will show
you some possibilities of using Robin Square.
Dynamic Mode
- This mode uses all Robin Square functions including pan/tilt movement and therefore
is good for a complete introduction of the fixture.
Static Mode
- This mode is suitable for projections on the wall, ceiling or ground without any pan/tilt move -
ment. Adjust the pan and tilt to desired positions and start test sequences by touching the green icon.
Music Trigger
- Use the item to activate the sound control of the running program via the built-in micro -
phone.
Preset Playback - This menu allows you to select the program which will be played in a loop after switching