Robin CycBar 12
23
“bL.12” a blue LED 12
“di.12” a dimmer 12
“S.tin” a step time
“COPY“. – this item duplicates the current prog. step to the next prog. step.
Note: Items in this menu depend on selected DMX mode.
5.
Use the UP/DOWN buttons to set a DMX value of the channel and then press the ENTER button.
6.
Use the UP/DOWN buttons to select next channel and press the ENTER button.
7.
After having set all channels in the current program step, press the ESCAPE button to go by one menu level
back and select another program step.
7.7 Special functions
rdM.L
---
Code
.This menu item shows the first part of the RDM identification code.
rdM.H
---
Code
. This menu item shows the second part of the RDM identification code.
ViFi
---
Wireless DMX.
The menu serves for reading of the wireless operation status (only for Wireless DMX
version).
50
---
Wireless DMX signal.
The menu item shows level of received signal in %. If the fixture is not linked to
the transmitter, “
niSS
” is displayed.
UnLI
---
Wireless DMX unlink.
The item serves for unlinking the fixture from transmitter.
AdJ
---
Effect Adjustment.
The menu allows calibration of white colours.
dMH
---
DMX Values.
The menu item allows to set desired colour before calibrating of white colours.
C.CAL
---
Colour calibration.
Calibration of white colours.
uPd.M.
---
Updating mode
. The menu item allows you to update software in the fixture via either serial or USB port
of PC.
The following are required in order to update software:
- PC running Windows /XP/7/8/10 or Linux
- DMX Software Uploader
- Flash cable RS232/DMX No.13050624 (if you want to use a serial port of PC)
- Robe Universal Interface (if you want to use an USB port of PC)
Note: Software update should execute a qualified person. If you lack qualification, do not attempt the update
yourself and ask for help your ROBE distributor.
DMX address, user program and all items in the menu "PerS" will be set to their default (factory) values.
To update software in the fixture:
I. Installation of the DMX Software Uploader.
1. DMX Software Uploader program is available from the ROBE web site at WWW.robe.cz.
2. Make a new directory ( e.g. Robe_Uploader) on your hard disk and download the software to it.
3. Unpack the program to the directory.
II.Fixture software updating.
1.Determine which of your ports is available on your PC and connect it:
- with the DMX input of the fixture if you using the flash cable RS232/DMX
- with the DMX output of the Robe Universal Interface if you using the USB cable.
Disconnect the fixture from the other fixtures in a DMX chain. Turn both the computer and
the fixture on. Make sure the lamp is switched off (only if the fixture involves a lamp).
Summary of Contents for Robin CycBar 12
Page 1: ...Version 1 0 ...
