Robe Robin CycBar 12, User Manual

Page: 6 / 29

Robin CycBar 12
6
For overhead installation, the fixture must be always secured with a safety wire that can
bear at least 10 times the weight of the fixture
1- Clamp 4- safety wire
2- Omega holder 5- truss
3- ¼ turn quick locks 6- attachment point
3.2 Connection to the mains
Fixtures must be installed by a qualified electrician in accordance with all national
and local electrical and construction codes and regulations.
If you install a cord cap on the power cable to allow connection to power outlets, install a grounding-type (earthed)
plug, following the plug manufacturer’s instructions.
The cores in the power cable are coloured according to the following table
.
Core (Eu) Core (US) Connection Plug Terminal Marking
Brown Black Live L
Light blue White Neutral N
Yellow/Green Green Earth
, GND,PE
This device falls under class one and must be grounded!
Design of the Robin CycBar 12 allows to connect several fixtures to AC mains power in one interconnected daisy
chain using power input and throughput connectors. Needed daisy chain cords are stated in the chapter
“Technical specifications “
The max. number of connected fixtures depends on the AC mains power voltage and fixture version:
EU version (CE)
US version (ETL)
15 fixtures at power supply= 230V 9 fixtures at power supply= 230V
13 fixtures at power supply= 208V 7 fixtures at power supply= 208V
7 fixtures at power supply= 120V 4 fixtures at power supply= 120V
Actual numbers of fixtures may differ from values stated above as you have to take into account the length of
supply cables, circuit breaker etc. at projecting of the fixtures installation.
Do not overload the supply line and the connecting leads.
Wiring and connection work must be carried out by qualified staff!