background image

Table of contents

1. Safety instructions ......................................................................................................... 3
2. Operating determination ................................................................................................ 4
3. Fixture exterior view ...................................................................................................... 5
4. Installation.......................................................................................................................6

4. Connection to the mains ............................................................................................ 6

4. Installing the lamp ...................................................................................................... 6

4.3 Lamp adjustment  ....................................................................................................... 7

4.4 Replacing the colour filters  

 ....................................................................................... 7

4.5 Installing top hats  ...................................................................................................... 8

4.6 Rigging the fixture

 ...................................................................................................... 8

4.7 DMX-5 connection ................................................................................................ 0

4.8 Ethernet connection ................................................................................................. 

5. Remotely controllable functions ................................................................................. 13
6. Control menu map ........................................................................................................ 14
7. Control menu  ...............................................................................................................17

7. Tab " Address" ......................................................................................................... 8

7. Tab "Information"...................................................................................................... 8

7.3 Tab "Personality" ...................................................................................................... 0

7.5 Tab "Stand-alone"  ................................................................................................... 

7.6 Tab "Service"............................................................................................................ 3

7.7 Icon "Lamp menu" .................................................................................................... 5

8. RDM ...............................................................................................................................25
9. Wireless DMX operation .............................................................................................. 26
10. Error and information messages .............................................................................. 26
11. Technical Specifications............................................................................................ 28
12. Maintenance and cleaning ......................................................................................... 30

Robin 600E Wash

Summary of Contents for Robin 600E Beam



































Reviews: