3
DMX
0.-.
0.-.3
3.-.63
64.-.
6.-.7
8.-.
60.-.
.-.3
4.-.
Pan/Tilt Macro
Disabled pan/tilt macro
Reserved
Figure of circle (from small to large)
Figure of horizontal eight (from small to large)
Figure of vertical eight (from small to large)
Figure of rectangle (from small to large)
Figure of triangle (from small to large)
Figure of star (from small to large)
Figure of cross (from small to large)
0
.-.7
8.-.
30.-.
Pan/Tilt Macro Speed
No macro generation
Macro generation from fast to slow-forwards
No macro generation
Macro generation from slow to fast-backwards
7.6 Tab "Service"
Adjust DMX Values
.
- The menu allows you to set all effects to desired positions before fine calibration of the
effects .
Adjust Lamp
- This item opens the light output of the fixture and enables to aim the light beam on the wall to
perform the fine lamp adjustment.
Calibrations
- This menu enables fine calibration of fixture effects and download default calibration values.
Calibrate Effects
- The menu allows the fine adjustment of effects. The menu contains list of effects
which can be calibrated:
Pan
- a fine pan movement
.
Tilt
- a fine tilt movement
Colour Wheel
- a colour wheel
.
Colour Wheel Fine
- a fine movement of the colour wheel
By using these items you can calibrate and adjust effects to their right positions.
Calibration via the control board
1. Disconnect DMX controller from the fixture and enter the "Calibrate Effects" menu.
2. Use the [up arrow] and [down arrow] to find desired effect and touch it to enter the fine effect adjustment
screen.
3. Set desired value and save it by touching the [confirm].
4. Repeat steps 2 and 3 for the next effects.
5. After calibrating all effects, touch the [confirm] to save all adjusted values and reset the fixture.
.
Calibration via the DMX controller
1. Connect DMX controller to the fixture and set fixture effects to the desired positions before fine calibration.
2. Enter the "Calibrate Effects" menu and now you can exactly calibrate desired effects by DMX controller.
There is a calibration protocol:
Effect
Mode 1
Mode 2
Mode 3
Pan.
.
.
channel.0.
.
channel.6.
.
channel.4
Tilt..
.
.
channel..
.
channel.7.
.
channel.
Colour Wheel
channel 22
channel 18
channel 16
Colour Wheel Fine
channel 23
channel 19
channel 17
After having calibrated all effects, touch the [confirm] to save adjusted values and reset the fixture.
Load Default Calibrations
- The item loads default (factory) calibration values.
Updating software
- The menu item allows you to update software in the fixture via either serial or USB port
of PC.
Summary of Contents for Robin 300 Plasma Wash
Page 1: ... Version1 5 ...
