Robe pixelPATT, User Manual

Page: 3 / 7

3
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE INSTALLING THE PRODUCT
.
1. Safety instructions
CAUTION!
The PixelPATT was designed for indoor use only.
The product is for professional use only, it is not for household use.
This product has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this manual.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this
manual or any unauthorized modification to the product.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on
immediately. The arising condensation water might damage your device. Leave the device switched off until
it has reached room temperature.
The pixel PATT should be operated with the PATT Driver only.
The PixelPATT becomes hot during its operation, allow it to cool prior
to manipulation.
The pixelPATT unit never must be covered with cloth or other materials during
operation.
Refer servicing to qualified service personnel.
Warning! Risk Group 2 LED product according to EN 62471
LED light emission. Risk of eye injury. Do not look into the beam at short distance of
the of the product. Do not view the light output with optical instruments or any
device that may conncentrate the beam.
The light source contains blue LEDs.
When choosing the installation spot, please make sure that the pixelPATT are not exposed to extreme heat,
moisture or dust.
Operate the pixelPATT only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the pixelPATT. Most damages are the result of unprofessional operation!
Please use the original packaging if the pixelPATT is to be transported.
Please consider that unauthorized modifications on the fixture are forbidden due to safety reasons!