26
gobo wheel, rotating gobo wheel and an empty aperture, the Focus Tracking will adjust the internal parameters,
therefore providing desired sharpness by adjusting the Focus might be required. If you use both Static gobo
wheel and rotating gobo wheel without further adjusting the Focus value, rotating gobo wheel will be automat
-
ically used for Focus Tracking 's focusing.
Default Settings
- The menu item allows to set all fixture parameters in this menu to the default (factory) values
except items "DMX Input".
Password Protection
- allows to enter password in order to prevent unauthorized person from changing setting
of the fixture.
Reset Web Password
- The menu item allows you to reset a password for access on the Web server (default
password: 2479, user: robe).
6.4 Tab "Manual Control"
Reset Functions
- The menu allows to reset the fixture either per function modules or all modules together.
Total System Reset
- The item resets all function modules.
Pan/Tilt Reset
- The item resets pan and tilt.
System Reset w/o P/T
- The item resets all function modules except pan/tilt
Pan Reset
- The item resets a pan.
Tilt Reset
- The item resets a tilt.
Colour System Reset
- The item resets colour wheel 1/colour wheel 2 and CMY+CTO system.
Gobo/Eff. Wh. Reset
- The item resets rotating gobo wheels and an effect wheel.
Optics/Prism/Frost Res.
- The item resets a zoom, focus, prism and a frost module.
Iris/Framing Sh. Reset
- The item resets an iris module and framing shutters.
Manual Effect control
-
Use the menu to control all fixture channels by means of the control panel.
6.5 Tab "Stand-alone"
Test Sequences
-
Use the menu to run a test/demo sequences without an external controller, which will show
you some possibilities of using Robin Forte.
Dynamic Mode
- This mode uses all Robin Forte functions including pan/tilt movement and therefore
is good for a complete introduction of the fixture.
Static Mode
- This mode is suitable for projections on the wall, ceiling or ground without any pan/tilt movement.
Adjust the pan, tilt, zoom and focus to desired positions an start test sequences by touching the green
icon.
Music Trigger
- Use the item to activate the sound control of the running program via the built-in microphone.
Preset Playback
- This menu allows you to select the program which will be played in a loop after switching
the fixture on (the option is commonly used in a stand-alone operation without an external controller).
None
- The option disables “Presetting playback” function.
Test
- The option starts the test sequences.
Prog. 1
- The option starts user program No. 1.
Prog. 2
- The option starts user program No. 2.
Play program
- Use the menu to run desired program in a loop.
Play Program 1
- The option starts user program No.1.
Play Program 2
- The option starts user program No. 2.
Summary of Contents for Painte
Page 1: ...1 Version 1 0 Version 1 0 ...