22
Maximum NonRes.
- A maximum temperature of the LED PCB since the fixture has been
fabricated.
Maximum Res.
- A maximum temperature of the LED PCBs since the counter
was last reset.
In order to reset some counter to 0, touch desired text box under item "Max.Res."
Driver Temperature
- The menu shows temperature on the LEDs control PCB in the fixture head.
Current
- A current temperature on the LEDs control PCB.
Maximum NonRes.
- A maximum temperature on the LEDs control PCB since
the fixture has been fabricated.
Maximum Res.
- A maximum temperature on the LEDs control PCB since the counter
was last reset.
In order to reset this counter to 0, touch the text box next to the item "Maximum Res.
Ambient Temperature
- The menu shows temperature in the fixture base .
Current
- A current temperature in the fixture base.
Maximum NonRes.
- A maximum temperature in the fixture base since
the fixture has been fabricated.
Maximum Res.
- A maximum temperature in the fixture base since the counter was last reset.
In order to reset this counter to 0, touch the text box next to the item "Maximum Res."
Base Temperature
- The menu shows temperature on the display PCB in the fixture base.
Current
- A current temperature on the display PCB.
Maximum NonRes.
- A maximum temperature on the display PCB since the fixture has
been fabricated.
Maximum Res.
- A maximum temperature on the display PCB since the counter
was last reset.
In order to reset this counter to 0, touch the text box next to the item "Maximum Res."
DMX Values -
The menu items allows you to read DMX values of each channel received by the fixture.
Wireless State -
The menu serves for reading of the wireless operation status.
Unlink Wireless Adaptor
- The item serves for unlinking the fixture from a DMX transmitter.
If the wireless module is not installed in the fixture, message" Wireless Module Not Installed" will appear.
Power Channel State
- Select this item to see current setting of the functions, which can be set by menu items
in "Personality" as well as by DMX command at channel "Power/Special functions".
Colour Functions State
- Select this item to see current setting of the colour functions, which can be set by
menu items in "Personality" as well as by DMX command at channel "Colour functions".
Software Version
- Select this item to read the software version of the fixture processors:
Display System
- A display processor on the display board in the fixture base
Module M
- a Pan/Tilt processor
Module L
- a LEDs control processor
Module O
- a Focus/zoom/frost control processor
Module F-A
-a Framming shutters control processor
Module F-B
- a Framming shutters/Iris control processor
Module G
- a Rot. gobo/static gobo wheel control processor
Module C
- a Colour wheel and CMY control processor
Product IDs -
The menu is used to read the MAC Address ,RDM UID and RDM Label.
LED Module Info
- Use this menu to read LEDs module information.
First Module Assembly
- Use the item to read initial information about the LEDs module installed in
the fixture. The fixture has to be connected to mains to read the values in the menu items.
Serial Number/ Device UID
- a serial number of the LEDs module/RDM UID of the fixture.
Installation Date/Time
- a date/time of the first installation of the LEDs module to a
some Forte device.
Intensity
- an original intensity of the LEDs module in percentages (100%).
LEDs On Time Total/Adaptive
- Total: a total time of the LEDs module operation during which
the dimmer intensity was > 0%.
Adaptive: a relative time of the LEDs module operation during which the dimmer intensity
Summary of Contents for Painte
Page 1: ...1 Version 1 0 Version 1 0 ...