25
Microphone Sensitivity
- Enter the menu if you want to adjust the microphone sensitivity from 1 (max.) to 20
(min.).
Blackout Settings
- Use the menu if you need to close the light output under certain conditions which are
described below
Blackout During MC
- Blackout during movement correction. Set this option On if you wish to close light
output during the time when the head goes to its correct position from which has been changed by an
external force.
Active Blackouts
- Use this menu if you wish to close the light output during effect changes.
Pan/Tilt Moving
- The menu item enables to close light output while the pan/tilt DMX values
are changing.
Colour Wheel Moving
- The menu item enables to close light output while colour wheel
is moving.
Frequency Setup
- The function allows you to set the PWM (Pulse Width Modulation) output frequency of
LEDs to 300Hz, 600Hz, 1200Hz , 2400Hz or High.
Frequency Adjust
- The menu item allows you fine adjustment of the LED frequency around selected frequency.
Init Effect Positions
- Use the menu to set all effects to the desired positions at which they will stay after
switching the fixture on without DMX signal received.
Screen Settings
- Use this menu to change the touch screen settings.
Display Intensity
- The item allows to control the intensity of the screen (1-min., 10-max.).
Screen saver Delay
- The item allows you to keep the screen on or to turn it off automatically after 1-10
minutes after last touch (or pressing any button on the control panel).
Touchscreen Lock
- The item allows you to lock the screen after last touch (or pressing any button on the
control panel). The time delay can be set in range of 1-10 minutes.To unlock the screen, press the
[ENTER/Display On] button.
Recalibrate Touchscreen
- The item starts calibration of the touch screen. Follow the instructions on
the screen.
Display Orientation
- The menu allows to change display orientation.
Normal
- Standard display orientation if the fixture is placed horizontally (e.g. on the ground).
Inverted
- Inverted orientation (needed if the fixture is hanging on the truss).
Auto
- The option activates a gravitation sensor for automatic screen orientation.
Note:
Auto
option is set as default. You change the display orientation by touching the icon
on the display,
an the option set in the "Display Orientation" menu is temporarily overriden.
Temperature unit
- Use the menu item to change temperature unit from °C to °F.
Fan Settings
- Use the menu to set fans operation mode.
Fan Mode
- Use the menu to set the fixture fans to max. power mode (option "
High
") or to
the auto-control mode (option "
Auto
"). The third option "
Quiet
" allows you to set desired fan noise.
The light output of the fixture is reduced at low speeds of fans.
Quiet - Blackout Fan Off
- The menu item allows you to stop all fans in the fixture (option "
On
")
when its light output is closed (shutter in range of 0-31 DMX or dimmer in 0 DMX).
Dimmer Curve
- Use the menu to select desired dimmer curve: Linear, Square Law or Super Square Law.
Gobo Indexing
- The following three options define transition from gobo rotation to gobo indexing.
Max. Speed & Shortcut
- Gobo goes from its rotation to desired indexed position with max. speed and
via shortest track.
Follow Speed & Direction
- Gobo goes from its rotation to desired indexed position with current speed
and keeps a direction of rotation.
Max. Speed & Follow Dir.
- Gobo goes from its rotation to desired indexed position with max. speed
and keeps a direction of rotation.
Date & Time Settings
- Use this menu to set current date and time for the fixture log system (menu "View
Logs"). Set this menu items before first fixture operation.
Focus Tracking
- This feature provides automatic sharpness re-adjustment during zoom movement, after an
initial sharpness has been set by the operator by setting the focus channel and enabling the FocusTracking. The
Focus Tracking feature is done via automatic movement of focus element, taking into account several internal
parameters, zoom position being one of them. To utilize the Focus Tracking, make sure to enable the Focus
Tracking, set the Zoom to value 200 and adjust Focus to desired sharpness. Then, while keeping Focus value
untouched, you can move the Zoom. Fixture will automatically keep the projection at the desired sharpness as
much as possible. You can also re-adjust the Focus value over time if needed. When switching between static
Summary of Contents for Painte
Page 1: ...1 Version 1 0 Version 1 0 ...