7
8.7 Stand-alone setting
Use this menu to set options for stand-alone mode as a selection of the playing program,programming and
modifying current programs.
Music Trigger
--- Select this function to enable the sound control of the running programs via the
built-in microphone.
Presetting Playback
--- This function allows you to select the program which will be played in the
stand-alone mode after switching the fixture on.Selected program will be played continuously
in a loop.
Disabled
--- The option disables “Presetting playback” function.
Test Program
--- The option will start built-in test program.
Program 1
--- The option will start created program No.
Program 2
--- The option will start created program No.
Program 3
--- The option will start created program No. 3
Note:
If the fixture operates in the controller mode ( DMX controller is connected) and any program from this
menu is selected ,in this case the fixture will not respond to the DMX controller after switching on and will play
selected program.
Playing program
--- Select this menu to run a bilt-in program or the 3 freely-programmable
programs in a loop.
Test Program In Loop
--- The option starts built-in test program.
Program 1 In Loop
--- The option starts created program No.
Program 2
In Loop
--- The option starts created program No.
Program 3 In Loop
--- The option starts created program No. 3
Select the program you wish and press [ENTER].The selected program starts running.By Pressing [ENTER]
again is possible to pause the program running.
Editing Program
--- Select this menu to edit or create the program.The ColorWash 700E AT has one built-in
program and the 3 free programs,each up to 99 steps.Each program step has a step time.
Step time-the time,during which effects last in the current step.
Procedure:
1. Select the program you want to edit (“Program 1” - “Program 3”) and press [ENTER].
2. Select “Edit Steps” menu and press [ENTER].
3. Select the desired program step (“Step 01” - “Step 99”) and press [ENTER].
4 Select the desired item and press [ENTER].Now you can edit DMX value for selected item:
“Pan”
- value 0-255
:
:
“Dimmer” -
value 0-255
“Step Time” -
value 0-25.5s
5. Select “Save” or “Save and Copy” and press [Enter] to confirm adjusted values:
“Save” -
saving the current prog. step
“Save and Copy” -
saving and copying the current prog. step to the next prog. step .
6. Go on next prog. step and repeat this procedure (steps 4 and 5).
After creation the program,you can simply reduced its length (by changing the start/end steps) using the “Start
Step” and “End Step” menu.
8.8 Reset functions
The ColorWash 700E AT can be reset totally or by function modules.Select relevant function to run a reset:
Reset All
--- This function enables the fixture to index all effects and return to their standard positions.
Pan/Tilt
--- This function resets pan and tilt.
Colour System
--- This function resets colour wheel and CMY module.
Zoom/Effect
--- This function resets zoom and effect wheel.
Dimmer/Strobe
--- This function resets dimmer/strobe module.
8.9 Special functions
Use this menu for special services like adjusting lamp or adjusting effects.
Summary of Contents for Color Wash 700E AT
Page 1: ... Version 2 1 ...
Page 37: ...37 ...
