10
5.5 Inserting/Exchanging colours
DANGER!
Install the colours with the device switched off only.
Unplug from mains before!
1. Gently bend out the colour module to release it from the determinative pins and eject it from the pressing snap.
2. Put the new colour module back under the pressing snap and plase it betwen 2 determinative pins .
5.6 Changing the front lenses
The ColorWash 2500E AT is supplied with the 2 types of the front lenses (Fresnel lens,wide-angle lens) and the Fresnel
lens is installed as standard.
Switch the device off before changing the lens.Be careful.Front lens is very
heavy!
If you want to change the front lens,follow the instructions:
1.Remove the front lens using a flathead screwdriver to unlock the four quarter-turn screws.
2.Unscrew the safety cabel from the lens
.Screw up the safety cable to the desired lens.
4.Place this lens and fix it by locking the four quarter-turn screws.
Quarter-turn screws
Quarter-turn
screws
Nut
Bolt
Safety cable
