CitySkape 48 (RGBW)
8
3.4 Installation of the barn-doors
You can install the barn-doors to better define illuminated surface. The barn-doors module is fastened in the
same way as the eggcrate lens module.
1.
Disconnect the fixture from the mains.
2.
Put the top edge of the barn-doors module into the second groove on the top side of the radiator ( detail
A) and the bottom edge into the second groove on the bottom side of the radiator and tighten four
locking screws M2 to secure this barn-doors module on the radiator.
Never close the barn-doors during fixture operation
Summary of Contents for CitySkape 48
Page 1: ...Version 1 8 ...
Page 26: ...CitySkape 48 RGBW 26 ...
