Eminere Inground
6
Note: the cabel (11) of the Eminere Inground is 2 m long, we recommend to shorten the cable on 1 m.
The supply/data cable to and from the mounting sleeve must be placed in a protective tube (12).
6.
After connecting cables to the junction box (8), screw the Eminere Inground (13) to the mounting sleeve (1)
by means of the four countersunk- allen head bolts M5x18 (14).
7.
Screw the cover plate (15) on the mounting sleeve (1) by means of the six countersunk- allen head bolts
M5x25 (16)
Junnction box
The Eminere Inground is equipped with auto-switching power supply that automatically adjusts to any 50-60Hz AC
power source from 120-277 Volts.
The Emineres Inground should be connected to the E-box (E-box Daisy/E-box Star/E-box Pro/E-box Lite) which
allows power supply of the Emineres Inground and their control.
Do not connect (disconnect) Emineres Inground to the E-box and each other when they are under voltage!
When you change any setting of the E-box, disconnect the E-box from power and connect it to power again
to activate changes which you have made.
1.
Unscrew the four screws M4x20 (17) on the cover of the junction box and remove this cover (18) with
gasket (19) to get access to the connection block (20).
Summary of Contents for ANOLIS Eminere Inground 2
Page 1: ...Version 1 1 ...
