Page: 6
TROUBLESHOOTING
If the unit does not heat up check the following points before calling for service.
The unit is plugged in correctly and the power is switched on.
The power point is not faulty.
The energy regulator is in the correct relative position.
The energy regulator knob is not loose or broken, rendering the switch
inoperable.
Check Appendix A on page 9 of this manual on RCD’S
Only after all these points have been checked should you call for service.
SPECIFICATIONS
Nominal Dimensions
Model
Power Source
Power Rating
Width
mm
Depth
mm
Height mm
MH16
220-240 Volts
AC 50-60Hz
120 - 130
Watts
166
173
285
Constant research and development may necessitate specification changes at any
time
.
